LR3/Disco 3
Attach the hinge springs.
Install the hinge springs.
3 .
Install the glove and stowage compartment strikers.
Tighten the screws.
4 .
Install the glove compartment lamp.
5 .
Install the instrument panel passenger side reinforcement.
Connect the electrical connector.
Tighten the Torx screws.
6 .
Install the passenger side footwell duct.
Install the clip.
7 .
Install the closing trim panel.
Connect the electrical connector.
Secure the clip.
8 .
Install the stowage compartment tray.
Secure the clips.
9 .
Install the glove compartment. For additional information, refer to
Glove Compartment (76.52.03)
(Section 501-12)
10 .
Install the PAD switch. For additional information, refer to
Passenger Air Bag Deactivation (PAD)
Switch (76.74.19)
(Section 501-20)
11 .
Install the instrument panel center reinforcement. For additional information, refer to
Instrument
Panel Center Reinforcement (76.46.34)
(Section 501-12)