LR3/Disco 3
Instrument Panel Upper Section (76.46.04)
Removal
Published : Oct 13, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Make the SRS system safe. For additional information, refer to
Standard Workshop Practices
(Section 100-00)
3 .
Remove the instrument panel driver side reinforcement. For additional information, refer
to
Instrument Panel Driver Side Reinforcement (76.46.31)
(Section 501-12)
4 .
Remove the instrument panel passenger side reinforcement. For additional information, refer
to
Instrument Panel Passenger Side Reinforcement (76.46.32)
(Section 501-12)
5 .
Remove the instrument panel speaker. For additional information, refer to
Instrument Panel Speaker
(86.50.11)
(Section 415-03)
6 .
Remove both A-pillar upper trim panels. For additional information, refer to
A-Pillar Trim Panel
(76.13.26)
(Section 501-05)
7 .
Remove the sunload sensor.
Release the 2 clips.
Disconnect the electrical connector.
8 .
Release the passenger air bag module bracket.
Remove the 2 Torx screws.