LR3/Disco 3
also incorporates thermal protection.
CLS Motor and Actuator Operating Parameters
Nominal operating current is at 23°C (73°F). Stall current is for 15 volts at –40°C (-40°F)
Lockout Protection
The vehicle cannot be locked or superlocked when the driver door is open. If an attempt is made to lock or superlock the
vehicle with the remote handset, while the driver door is open, the CJB (central junction box) ignores the request.
Automatic Relock
If the CLS is unlocked using the remote handset, and a door or the tailgate is not opened, or the key is not put in the
ignition switch within 1 minute, the CJB (central junction box) automatically locks or superlocks the vehicle again,
depending on the previously locked mode. Automatic relock is designed to prevent inadvertent unlocking and disarming of
the vehicle by accidentally pressing the unlock button on the remote handset.
Transportation Mode
When the vehicle is in the transportation mode, SPE is enabled and global unlocking with the remote handset is disabled.
The speed locking function is also disabled, but crash unlocking is retained.
CONTROL DIAGRAM
NOTE :
Motor or Actuator Current On Time,
ms
Maximum Operations, Per
Minute
Nominal Operating
Current, A
Stall Current,
A
Upper Tailgate
Latch
400 ± 10
10
2.5
8.0
Lower Tailgate
Latch
700 ± 10
10
TBD
10.5
Fuel Filler Door
Lock
700 ± 10
5
2.0
8.0
Door Superlock
100 - 110
10
1.0
3.4
Door Lock
100 - 110
10
3.0
10.9
A = Hardwired connection; F = RF transmission; N = Medium speed CAN (controller area network) bus
