LR3/Disco 3
1 .
CAUTION: It is possible to incorrectly install the cable, ensure the ferrule and clip are fully
engaged.
Attach the actuator to the liftgate latch cable.
2 .
Install the cover.
Tighten the Torx screws.
3 .
Install the liftgate actuator.
Tighten the bolts to 10 Nm (7 lb.ft).
Connect and secure the electrical connector.
4 .
Install the tailgate trim panel. For additional information, refer to
Tailgate Trim Panel (76.49.23)
(Section 501-05)