LR3/Disco 3
Liftgate Latch (76.37.19)
Removal
Installation
Published : Mar 16, 2004
1 .
Remove the tailgate trim panel.
2 .
Release the liftgate latch.
Remove the 3 Torx screws.
3 .
Remove the liftgate latch.
Disconnect the electrical connector.
Release the liftgate latch to actuator cable.
1 .
Install the liftgate latch.
Attach the liftgate latch to actuator cable.
Connect the electrical connector.
Tighten the Torx screws to 10 Nm (7 lb.ft).
2 .
Install the tailgate trim panel.
3 .
Adjust the liftgate striker. For additional information, refer to
Liftgate Striker Adjustment (76.37.28)
(Section 501-14)