LR3/Disco 3
Liftgate Striker Adjustment (76.37.28)
1 . Check for an equal gap and alignment to the adjacent panels. If incorrect, follow the adjust procedure below.
2 . Remove the liftgate striker trim panel.
3 . Loosen the 2 liftgate striker bolts.
4 . Close the liftgate and check for an equal gap and alignment to the adjacent panels.
5 . Open the liftgate and tighten the liftgate striker bolts to 25 Nm (18 lb.ft).
6 . Install the liftgate striker trim panel.
Published : Jun 28, 2004