Rear Wiper Pivot Arm Replacement - LR3/Disco 3 - 501-16
Rear Wiper Pivot Arm (84.35.01)
Special Service Tools
General purpose puller
100-005A (LRT-99-500A)
Removal
Installation
Published : Jul 1, 2004
1 .
Noting the fitted position and using the special tool, remove the rear wiper pivot arm.
Remove the nut cover.
Remove the nut.
2 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the wiper blade.
Release the clip.
1 .
To install, reverse the removal procedure.
Tighten the nut to 15 Nm (11 lb.ft).