LR3/Disco 3
GENERAL
The sunroof is electrically operated through a two-way rocker switch located on the roof mounted centre console. An
electric motor, attached to the sunroof frame, drives the glass sunroof panel to the tilt or open positions. The glass panel
is operated by two cables, which are driven by the motor.
The sunroof frame is bolted to eleven mounting points on the roof panel. The frame is a large injection moulding and
supports all of the sunroof components. Two aluminium guides held in the frame, on each side. The sunroof motor
attaches to the rear of this frame. The motor is supported on the frame with three screws.
The sunroof glass panel is attached to the guide at the extreme front and rear. The tilt and slide positions are achieved by
driving the attachment points on the panel over two fixed curves, one in the guide and one fixed to the panel.
Sunroof Motor
5
-
Motor
6
-
Control module
7
-
RH rear drain tube
8
-
LH rear drain tube
9
-
LH front drain tube
10
-
Deflector
11
Access panel
12
RH front drain tube
Item Part Number Description
1
-
Access panel
2
-
Switch
