LR3/Disco 3
Installation
8 .
Remove the roof opening panel motor.
Disconnect the electrical connector.
Remove the 3 Torx screws.
Remove the spacer.
1 .
Install the roof opening panel motor.
Install the spacer.
Tighten the Torx screws to 4 Nm (3 lb.ft).
Connect the electrical connector.
2 .
Position the headliner.
Secure with the clips.
3 .
Install the passenger assist handles.
Install the screws.
Secure the screw covers.
4 .
Install the sun visors.
Install the clips.
Install the screws.
Install the screw covers.
Connect the electrical connectors.