LR3/Disco 3
Installation
All vehicles
Vehicles with dynamic suspension
All vehicles
3 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the front bumper air ducting.
1 .
Install the bumper air ducting.
2 .
Install the front bumper assembly.
Tighten the bolts to 25 Nm (18 lb.ft).
3 .
Secure the washer reservoir.
Tighten the 2 bolts to 10 Nm (7 lb.ft).
1 .
Secure the front air suspension valve block to the bumper.
1 .
Install the front bumper cover. For additional information, refer to
Front Bumper Cover (76.22.72)
(Section 501-19)
