LR3/Disco 3
Front Safety Belt Retractor (76.73.13)
Removal
Published : Apr 29, 2004
1 .
Position the front seat fully forwards.
2 .
Make the SRS system safe. For additional information, refer to
Standard Workshop Practices
(Section 100-00)
3 .
Remove the B-pillar upper trim panel. For additional information, refer to
B-Pillar Upper Trim Panel
(76.13.28)
(Section 501-05)
4 .
Release the safety belt upper anchor from the B-pillar.
Remove and discard the Torx bolt.
5 .
Release the front seat switch pack trim panel for access.
Remove the 2 screws.