LR3/Disco 3
Installation
6 .
Remove the front safety belt retractor.
Remove and discard the Torx bolt.
1 .
Install the front safety belt retractor.
Tighten the Torx bolt to 40 Nm (30 lb.ft).
2 .
Install the front seat switch pack trim panel.
Tighten the screws.
3 .
Attach the safety belt upper anchor.
Tighten the Torx bolt to 40 Nm (30 lb.ft).
4 .
Install the B-pillar upper trim panel. For additional information, refer to
B-Pillar Upper Trim Panel
(76.13.28)
(Section 501-05)