LR3/Disco 3
Rear Safety Belt Buckle LH - Vehicles With: 60/40 Split Seat (76.73.60)
Removal
Installation
Published : Aug 5, 2004
1 .
Remove the safety belt buckle.
Raise the seat cushion.
Release the retaining strap.
Remove the Torx bolt.
Release the tension spring.
1 .
Install the safety belt buckle.
Attach the tension spring.
Tighten the Torx bolt to 25 Nm (18 lb.ft).
Attach the retaining strap.
Lower the seat cushion.