LR3/Disco 3
Third Row Safety Belt Retractor (76.73.28)
Removal
Installation
Published : Sep 29, 2004
1 .
Remove the D-pillar upper trim panel. For additional information, refer to
D-Pillar Trim Panel
(76.13.30)
(Section 501-05)
2 .
Release the safety belt upper anchor.
Remove and discard the Torx bolt.
3 .
Remove the third row safety belt retractor.
Remove and discard the Torx bolt.
1 .
Install the third row safety belt retractor.
Tighten the Torx bolt to 40 Nm (30 lb.ft).
2 .
Install the safety belt upper anchor.
Tighten the Torx bolt to 40 Nm (30 lb.ft).
3 .
Install the D-pillar upper trim panel. For additional information, refer to
D-Pillar Trim Panel (76.13.30)
(Section 501-05)