LR3/Disco 3
Installation
Remove the 3 Torx screws.
Release the steering column adjustment lever.
6 .
CAUTION: Do not dismantle the clockspring, it has no servicable parts and must be replaced
as a complete assembly.
Remove the clockspring.
Disconnect the 2 electrical connectors.
Remove the 4 screws.
1 .
CAUTION: Correct clockspring alignment can be found by viewing a yellow marker through the
window situated on the clockspring face. If the marker is not visible, carefully turn the clockspring. If
the turning force increases before the marker is visible, reverse the direction to avoid component
damage.
To install, reverse the removal procedure.
