LR3/Disco 3
Rear Side Air Curtain Module (76.74.04)
Removal
NOTE :
Published : Apr 29, 2004
WARNING: It is imperative that before any work is undertaken on the SRS system, the appropriate
information is read thoroughly.
WARNING: Always disconnect both battery cables before beginning work on the SRS system.
Disconnect the ground cable first. Never reverse connect the battery.
If the SRS component is to be replaced, the bar code of the new unit must be recorded.
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Make the SRS system safe. For additional information, refer to
Standard Workshop Practices
(Section 100-00)
3 .
Remove the headliner. For additional information, refer to
Headliner (76.64.15)
(Section 501-05)
4 .
Remove the side air curtain module.
Disconnect the electrical connector.
Remove the 5 Torx screws.
Release the retaining strap.
