LR3 (LA) V6-4.0L (2006)
Power Trunk / Liftgate Lock Actuator: Service and Repair
Liftgate Latch Actuator
Service Repair No - 86.26.27
Removal
1. Remove the tailgate trim panel.
2. Release the liftgate actuator.
^
Loosen the 2 bolts.
^
Disconnect the electrical connector.
3. Remove the actuator cover.
^
Remove the 2 Torx screws.
4. Remove the liftgate actuator.
^
Release the liftgate latch to actuator cable.
Installation
1. CAUTION: It is possible to incorrectly install the cable, ensure the ferrule and clip are fully engaged.
Attach the actuator to the liftgate latch cable.