LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-2398002.png)
2. Install the cover.
^
Tighten the Torx screws.
3. Install the liftgate actuator.
^
Tighten the bolts to 10 Nm (7 lb.ft).
^
Connect and secure the electrical connector.
4. Install the tailgate trim panel.
Land Rover Workshop Service and Repair Manuals
Power Trunk / Liftgate Lock Switch >
< Motor-Release-Tailgate-Lower-RH|Page 11161
Page 2
