landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Fuel Filler Hose|Service and Repair|Page 4387 > < Fuel Rail|Service and Repair|Page 4382
Page 1
background image

Fuel Filler Hose: Service and Repair

Fuel Tank Filler Pipe 

Removal 

WARNING:

^

Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always
present and may ignite. Failure to follow these instructions may result in personal injury.

^

The spilling of fuel is unavoidable during this operation. Ensure that all necessary precautions are taken to prevent fire and explosion.

^

Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. 

1. Position the vehicle on a lift.
2. Disconnect the battery ground cable.
3. Drain the fuel tank.
4. Remove the RH rear wheel and tire.
5. Remove the fender moulding.
6. Remove the fender splash shield.

^

Remove the 2 screws.

^

Remove the 6 retainers.

^

Disconnect the electrical connector.

7. Remove the fuel filler door.
8. Remove the spare wheel and tire.
9. Disconnect the breather pipes.

^

Remove the clip.

^

Release the 2 clips.

^

Remove and discard the cable tie.

Fuel Filler Hose|Service and Repair|Page 4387 > < Fuel Rail|Service and Repair|Page 4382