LR3 (LA) V6-4.0L (2006)
/v6-4.0l/Page-1043002.png)
CAUTION: Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open
connections to prevent contamination.
10. Disconnect the fuel filler neck from the fuel tank.
^
Remove the tamper proof cover.
^
Remove and discard the hose clip.
11. Remove the fuel tank filler pipe connector hose.
^
Remove the tamper proof cover.
^
Remove and discard the hose clip.
NOTE: Note the fitted position.
12. Remove the fuel tank filler pipe.
^
Remove the bolt.
Installation
1. Install the filler pipe connector hose.
^
Install the new tamper proof clip.
NOTE: Align to the position noted on removal.
