Side lamps – circuit operation

SIDE LAMPS – CIRCUIT OPERATION

CIRCUIT OPERATION

Side lamps:

Activation of the side lamp switch, when the ignition key is in, when the ignition is on, or when the head lamp switch is on, will result in the operation of the following; front LH and RH side lamps, rear LH and RH side lamps, number plate lamps, lamps on warning lamp and the rear door switch pack illumination. The following lamps will also operate through the activation of the side lamp switch: Clock, fascia switch pack, console switch pack, gear select assembly, instrument pack, front cigar lighter, Hevac panel switches and I.C.E. (remote telephone dial, when fitted).

Parking lamps:

With the ignition and auxiliary off, the key out and the headlamp switch in the side lamp position, the parking lamps will be activated according to the position of the direction indicator switch as follows: If the indicator switch is in the central position,
then all the side lamps will be on. If the indicator switch is in the RH position, then
the front right and rear right side lamps will be on. If the indicator switch is in the LH position, then
the front left and rear left side lamps will be on. If the headlamp switch is set to the headlamp position, then normal side lamps will operate in conjunction with the headlamps.

Side lamp Warning lamps:

The side lamp warning lamp will be active whenever the side lamp switch is on and the side lamps are operating in side lamp mode, but not when the key is removed and the parking lamp mode is on.