Range Rover P38
19
FUEL SYSTEM
NEW RANGE ROVER
18
REPAIR
14. Lower tank assembly. Remove from jack.
Do not carry out further dismantling if
component is removed for access only.
Disassemble
15. Remove tank from cradle.
16. Slacken clip. Remove fill breather pipe from tank
unit.
17. Disconnect feed and return pipes from tank unit.
Remove each pipe from 2 fuel tank clips.
18. Remove tank unit retaining ring using
LRT-19-001. Remove assembly from tank.
WARNING: A quantity of fuel will be
retained in the unit, care must be taken to
avoid excessive spillage during removal.
19. Remove tank unit sealing rubber and discard.
Reassemble
20. Fit new sealing rubber.
21. Fit tank unit. Align location marks.
22. Fit retaining ring using LRT-19-001.
23. Connect fuel feed and return pipes to tank unit.
Tighten to
16 Nm (12 lbf.ft)
24. Secure pipes to fuel tank clips.
25. Position fill breather pipe to tank unit. Secure
with clip.
26. Position tank in cradle.