Range Rover P38
R380 GEARBOX
3
REPAIR
18. Disconnect multiplugs from reverse and neutral
switches.
19. Release harness from clips.
20. Remove 3 bolts securing oil cooler pipe adaptor
to gearbox.
21. Release adaptor, collect 2 ’O’ rings and discard.
Plug connections.
22. Remove banjo bolts securing breather pipes to
gearbox and transfer box.
23. Collect 2 sealing washers from each union and
discard. Plug pipes and connections.
24. Tie breather and oil cooler pipes aside.
25. Position adaptor plate to transmission lift. Secure
with bolts.
26. Raise transmission lift into position. Secure
adaptor plate to gearbox mounting bracket holes
with 4 bolts.
27. Remove transmission stand.
28. Lower transmission for access.
CAUTION: Place a wooden block between
axle case and sump to support engine.
29. Remove bolt securing harness bracket to
gearbox.
30. Remove 8 bolts securing gearbox to bell
housing.
CAUTION: Do not allow the weight of the
gearbox to be supported by the clutch.
