Range Rover P38
ELECTRONIC AIR SUSPENSION
9
REPAIR
BUMP STOP
Service repair no - 60.30.10
Remove
1. Raise the vehicle.
WARNING: Support on safety stands.
2. Pull bump stop from body.
Refit
3. Fit bump stop.
4. Remove safety stands. Lower vehicle.
COMPRESSOR INLET FILTER
Service repair no - 60.50.12
Remove
CAUTION: Dirt or grease must not enter
the system.
1. Remove cover from air supply unit.
2. Remove inlet filter from compressor.
Refit
3. Apply Loctite 572 to filter threads.
4. Fit filter Tighten to
1.0 Nm. (0.74 lbf.ft). Refit
cover.