Range Rover P38
HEATING AND VENTILATION
7
REPAIR
BLOWER MOTOR
Service repair no - 80.20.15
Remove
1. Remove glove box assembly.
See CHASSIS
AND BODY, Repair.
2. Release 2 clips securing fascia harness trunking
to fascia frame.
3. Remove centre screws from 4 scrivet fasteners
securing drivers side lower closing panel.
4. Release panel for access to harness clip. Collect
outer parts of fasteners from closing panel.
5. Remove upper fascia closing panel.
See
CHASSIS AND BODY, Repair.
6. Release clip securing harness trunking to fascia
frame.
7. Remove 2 bolts securing cruise control ECU
bracket to fascia frame. Place bracket aside.
8. Release SRS harness connector from bracket.
Position harness aside.
9. Disconnect Lucar connector and multiplug from
blower motor.