Range Rover P38 Heater Repair - Blend Flap Servos | 80-HEATING & VENTILATION Solutions
80
HEATING AND VENTILATION
NEW RANGE ROVER
8
REPAIR
10. Remove 4 screws securing blower motor to
casing.
11. Remove motor and fan assembly. Do not stress
fascia harness.
Refit
12. Reverse removal procedure.
BLEND FLAP SERVOS - HEATER ONLY
Service repair no - 80.20.04
NOTE: This procedure applies to non air
conditioned vehicles. For air conditioned
vehicles.
See this section.
Remove
1. Open glove box. Remove 5 screws securing
glove box liner to fascia.
2. Release glove box liner. Disconnect lamp
multiplug.
3. Release cable from glove box latch.