‘A’ post fascia squeak
- Make
- Land Rover
- Model
- Range Rover P38 Technical Bulletins
- Section
- ‘A’ post fascia squeak › ‘A’ post fascia squeak
‘A’ POST FASCIA SQUEAK
- Model
- New Range Rover
- Affected vehicles
- 308967 to 314051
- Date
- 1995-10-18
- Reference
- 18/10/95
Bulletin text
‘A’ Post Fascia Squeak
MODEL
New Range Rover
DETAIL
New Range Rover enquiries through the nerve centre have identified a squeak from the lower left hand ‘A’ post/fascia area. Investigations have found that under certain conditions the VIN plate can contact the windscreen, and ultimately cause a squeak.
ACTION REQUIRED
Adjust the VIN plate to achieve clearance between the VIN plate and the windscreen.
PARTS INFORMATION
Not applicable
PROCEDURE
Insert a suitable piece of thin plastic between the windscreen and the VIN plate, and carefully prise the VIN plate away from the windscreen to provide suitable clearance.
18/10/95
NRR/76/43/95/EN
AFFECTED VEHICLES
LP 308967 to 314051 LH LJ LD
WARRANTY
Normal warranty policy and procedures apply
COMP. CODE
8D3K
SRO
76.13.89/27 Provide clearance between VIN plate and windscreen 00.05 hour
Parts & tools for this job For Land Rover Range Rover
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.