Workshop Manuals Factory service & repair Land Rover
01 General and service information02 Engine03 Fuel, emissions and engine management04 Cooling system05 Manifolds and exhaust06 Transmission and axles07 Steering and suspension08 Brakes09 Wheels and tyres10 Body, trim and restraints11 Heating and air conditioning12 Electrical and instruments13 Service and recall actions
Land Rover Range Rover P38 Technical Bulletins10 · Body, trim and restraints
10 · Body & interior

Uneven carpet-rear footwell

Make
Land Rover
Model
Range Rover P38 Technical Bulletins
Section
Uneven carpet-rear footwell › Uneven carpet-rear footwell
Body, trim and restraintsUneven carpet-rear footwell

UNEVEN CARPET-REAR FOOTWELL

Model
New Range Rover
Affected vehicles
All
Date
1995-08-02
Reference
02/08/95
Uneven Carpet-Rear Footwell – bulletin page 1

Bulletin text

Uneven Carpet - Rear Footwell

MODEL

New Range Rover

DETAIL

Under certain conditions it has been found that the rear footwell carpet can exhibit an uneven appearance due to an excess of carpet material.

ACTION REQUIRED

In the event of a customer complaint of uneven carpet in the rear footwell, follow the procedure below

PARTS INFORMATION

Loctite 495

Refer to bulletin 131/93 for supplier address

PROCEDURE

1. Remove the rear footwell plastic carpet edge finishers.

2. Lift the carpet locally to the uneven area.

3. Apply Loctite 495 adhesive to the exposed area.

4. Pull the carpet tight and refit ensuring that the carpet is flat and even.

5. Refit the carpet edge finishers.

02/08/95

NRR/76/34/95/EN

AFFECTED VEHICLES

LP All LH LJ LD

WARRANTY

Normal warranty policy and procedures apply

COMP. CODE

8C1C

SRO

76.49.89/29 Refit uneven carpet 00.20 hour

Parts & tools for this job For Land Rover Range Rover

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.