Thermostat housing - coolant leak
- Make
- Land Rover
- Model
- Range Rover P38 Technical Bulletins
- Section
- Thermostat housing - coolant leak › Thermostat housing - coolant leak
THERMOSTAT HOUSING - COOLANT LEAK
- Model
- New Range Rover
- Affected vehicles
- All V8 Petrol Derivatives from Vin LP 300001 to LP 300805
- Date
- 1994-11-23
- Reference
- 23/11/94
Bulletin text
Thermostat Housing - Coolant Leak
MODEL AFFECTED VEHICLES
New Range Rover All V8 Petrol Derivatives from Vin LP 300001 to LP 300805
DETAIL
A small number of vehicles within the above Vin range may show signs of fatigue around the thermostat housing welded joint, investigations have shown this to be a supplier issue relating to assembly process.
All Petrol vehicles within the above Vin range will require a visual check to be carried out, if any sign of fatigue or coolant leaks are evident, the thermostat housing will require replacing.
ACTION REQUIRED
During the first service or at the earliest opportunity, inspect the thermostat housing for leaks and replace if necessary. Please submit a product report providing vehicle details in instances where thermostat housing are replaced.
PARTS INFORMATION
ESR 2857 Thermostat assembly
PROCEDURE
Refer to the workshop manual section 26. Carefully drain coolant and reuse.
23/11/94
NRR/26/04/94/EN
WARRANTY
Normal warranty policy and procedures apply
COMP. CODE
2D5B
SRO
26.45.01 Replace Thermostat Housing 01.10 hours
Parts & tools for this job For Land Rover Range Rover
- FLUIDCoolantSearch: Land Rover coolant antifreeze
- PARTThermostatSearch: Land Rover Range Rover thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.