Workshop Manuals Factory service & repair Land Rover
01 General and service information02 Engine03 Fuel, emissions and engine management04 Cooling system05 Manifolds and exhaust06 Transmission and axles07 Steering and suspension08 Brakes09 Wheels and tyres10 Body, trim and restraints11 Heating and air conditioning12 Electrical and instruments13 Service and recall actions
Land Rover Range Rover P38 Technical Bulletins07 · Steering and suspension
07 · Steering & suspension

Ride quality poor

Make
Land Rover
Model
Range Rover P38 Technical Bulletins
Section
Ride quality poor › Ride quality poor
Steering and suspensionRide quality poor

RIDE QUALITY POOR

Model
New Range Rover
Affected vehicles
Upto 348054
Date
1997-02-07
Reference
07/02/97
Ride Quality Poor – bulletin page 1

Bulletin text

Ride Quality - Poor

MODEL

New Range Rover

DETAIL

As part of continuos quality improvements new suspension dampers are now available. The new units have a revised setting and a improved fluid fill to prevent deterioration of setting level. The new setting provides improved damping and roll control. Dampers may be changed in axle or vehicle sets only.

ACTION REQUIRED

Upon complaint of poor ride quality, where no other cause can be found, the dampers should be replaced in axle or vehicle sets.

PARTS INFORMATION

STC 3672 Front damper kit

STC 3671 Rear damper kit

PROCEDURE

Refer to the workshop manual sections 60/64.

Dampers should be replaced in axle or vehicle sets only.

© Rover Group 1996

07/02/97

60/02/97/EN

AFFECTED VEHICLES

LP Upto 348054 LH LJ LD

WARRANTY

Warranty policy and procedures apply

COMP. CODE

5R1U Front 5R5U

SRO

Front 60.30.01 Dampers both sides renew 00.60 hour Rear 64.30.01 Dampers both sides renew 00.50 hour

Parts & tools for this job For Land Rover Range Rover

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.