Steering wheel offset in low suspension profile
- Make
- Land Rover
- Model
- Range Rover P38 Technical Bulletins
- Section
- Steering wheel offset in low suspension profile › Steering wheel offset in low suspension profile
STEERING WHEEL OFFSET IN LOW SUSPENSION PROFILE
- Model
- Range Rover
- Affected vehicles
- All vehicles
- Date
- 1998-06-17
- Reference
- Bulletin 0001, CDS ref L8444bu
Bulletin text
Range Rover
AFFECTED RANGE:
All vehicles
PROBLEM:
STEERING WHEEL OFFSET IN LOW SUSPENSION PROFILE
CAUSE:
When speeds in excess of 50 mph (80 km/h) are sustained, the air suspension will automatically lower the vehicle to the ‘Low’ ride height setting.
As the suspension geometry changes to the ‘Low’ setting, the steering wheel will rotate two degrees (2°) to the right.
ACTION:
Do not attempt to rectify this condition.
Steering wheel alignment can only be checked/reset with the suspension in ‘Standard’ profile height setting.
In the event of customer complaint, explain that there is no fault and that this effect is normal for a vehicle with adjustable ride height.
PARTS INFORMATION:
Not applicable
WARRANTY CLAIMS: Not applicable
Steering wheel alignment - check and adjust if required, is part of the Pre Delivery Inspection. Item 41 - PDI Check Sheet refers.
Warranty Claims are therefore not acceptable.
Bulletin N o : 0001 L8444bu 1
Parts & tools for this job For Land Rover Range Rover
- TOOLCoil spring compressorSearch: coil spring compressor
- TOOLBall joint separatorSearch: ball joint separator
- PARTShock absorbersSearch: Land Rover Range Rover shock absorbers
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.