Range Rover (LM) V8-4.4L (2009)
Parking Assist Distance Sensor: Service and Repair
Rear Parking Aid Sensor
Rear Parking Aid Sensor
Removal
CAUTION: Make sure damage does not occur to bumper cover. Failure to follow this instruction may result in damage to the vehicle.
NOTE: Access to the parking aid sensor is gained from the rear of the bumper cover.
1. Remove the rear parking aid sensor.
-
Disconnect the electrical connector.
2. Remove the parking aid sensor trim panel.
Installation
1. Install the parking aid sensor trim panel.
CAUTION: Make sure damage does not occur to bumper cover. Failure to follow this instruction may result in damage to the vehicle.
2. Install the rear parking aid sensor.
-
Connect the electrical connector.