Range Rover (LM) V8-4.4L (2009)
Rear Door Exterior Handle: Service and Repair
Exterior Door Handle Mechanism
Removal
1. Remove the side air bag module.
2. Disconnect the door speaker electrical connector.
3. Remove the front door inner weathershield.
4. Remove the grommet for access to the lock screw.
5. Remove the screw securing the lock and remove the lock assembly.
6. Remove the screw securing the exterior front door handle.
7. Remove the front door exterior handle.
8. Disconnect the release cable from the exterior front door handle.
9. Remove the exterior front door handle.
10. Release the cable from the clip and collect the reinforcement.
Installation
1. Connect the latch release cable to door handle.
2. Position the inner reinforcement to the door.
3. Install the cable to the inner reinforcement and secure in the clip.
4. Install the exterior front door handle, align and install the screw.