landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Rear Door Latch > < Rear Door Exterior Handle|Service and Repair
Page 2
background image

^

Do not fully tighten at this stage.

5. Check for correct alignment.

^

Tighten the screw to 10 Nm (7 ft. lbs.).

6. Check the operation of the exterior front door handle and the lock.
7. Install the grommet.
8. Install the front door inner weathershield.
9. Connect the door speaker electrical connector.

10. Install the side air bag module.

Rear Door Latch > < Rear Door Exterior Handle|Service and Repair