Range Rover (LM) V8-4.4L (2009)
Rear Door Panel: Service and Repair
Rear Door Trim Panel
Service Repair No - 76.34.04
Removal
1. Remove 3 screws from the rear door trim panel.
2. Remove and discard the access cover from the rear door trim panel.
^
Remove the screw.
3. Release the rear door trim panel.
^
Release the 11 clips.
4. Release the rear door trim panel centre clip.
5. Release the upper edge of the rear door trim panel.
6. Release the interior rear door handle from the release cable.
7. NOTE: Do not disassemble further if the component is removed for access only.
Remove the rear door trim panel.
^
Disconnect the 3 electrical connectors.
8. Remove the speaker.
^
Remove the 3 screws.
^
Remove the speaker grille.
9. Remove the interior rear door handle reinforcement bracket.
^
Remove clip from the interior rear door handle reinforcement bracket.
^
Remove the 2 nuts.
^
Remove the 11 clips.