Range Rover (LM) V8-4.4L (2009)
6. Remove the seat control switch.
7. Remove the front seat base side trim panel mounting bracket.
^
Release the 2 wiring harness clips.
^
Remove the 4 screws.
8. Remove the front seat backrest hinge cover.
^
Remove the 2 screws.
^
Release the clip.
9. NOTE: Left-hand shown, right-hand similar.
Remove the 2 clips from the front seat backrest cover lower trim panel.
10. Remove the front seat backrest cover lower trim panel.
^
Release the front seat backrest cover lower trim panel from the 2 clips.