Range Rover (LM) V8-4.4L (2009)
Spoiler: Service and Repair
Rear Spoiler
Removal
1. Remove the liftgate upper trim panel.
2. Remove the 3 bolts securing the rear spoiler to tailgate.
3. Disconnect the electrical connector.
4. If equipped disconnect the electrical connector from the parking aid camera.
5. Remove the rear spoiler.
^
Carefully release the clips.
^
Release the electrical harness.
6. NOTE: Do not disassemble further if the component is removed for access only.
Remove the high mounted stoplamp.
^
Remove the 4 screws.
^
Remove the wiring harness.
7. Remove the parking aid camera.
^
Remove the screw.
^
Carefully release the 2 clips.
8. If equipped remove the parking aid camera bracket.
^
Drill out the rivet.
^
Remove the adhesive pad.