Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-2438002.png)
Installation
1. If equipped install the parking aid camera.
^
Install the rivet.
^
Install the adhesive pad.
2. If equipped install the parking aid camera.
^
Install the clips.
^
Install the screws.
3. Install the high mounted stoplamp.
^
Secure the wiring harness.
^
Install the screws.
4. Install the rear spoiler to the tailgate.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
5. Connect the electrical connector.
6. If equipped connect the electrical connector to the parking aid camera.
7. Install the liftgate upper trim panel.
