Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1470003.png)
^
Remove the bolt and discard the nut.
NOTE: Right-hand shown, left-hand similar.
16. Disconnect both rear suspension height sensor electrical connectors.
17. Using a suitable hydraulic jack, support the rear subframe.
18. Remove the 4 rear subframe mounting bolts.
19. Lower the rear subframe to a maximum of 20 mm (0.78 inches).
NOTE: Note the routing of the parking brake emergency release cable.
20. Release the parking brake emergency release cable and rear suspension spring air lines.
^
Release from the 2 clips.
