Range Rover (LM) V8-4.4L (2009)
8. Release the accessory drive belt.
^
Rotate the accessory drive belt tensioner counter-clockwise, using a 3/8" drive wrench.
NOTE: Note the fitted position.
9. Remove the accessory drive belt.
10. Using the special tools, retain the crankshaft pulley.
CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the
crankshaft.
NOTE: The crankshaft pulley retaining bolt will be very tight.
11. Remove the crankshaft pulley retaining bolt.
^
Discard the bolt.
12. Remove the special tools.
13. Using the special tools, remove the crankshaft pulley.
^
Collect the locking ring.