Range Rover (LM) V8-4.4L (2009)
crankshaft.
6. Using the special tools, retain the crankshaft pulley.
^
Tighten the crankshaft pulley bolt to 380 Nm (280 ft. lbs.).
7. Remove the special tools.
8. Install the accessory drive belt.
9. Install the cooling fan belt tensioner.
^
Tighten the M10 bolt to 45 Nm (33 ft. lbs.).
10. Install the cooling fan drive hub bearing.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
11. Install the cooling fan drive pulley.
^
Tighten the bolts evenly to 25 Nm (18 ft. lbs.).
12. Install the cooling fan drive belt.
^
Using a 1/2 inch square drive bar, rotate the drive belt tensioner clockwise.