Range Rover (LM) V8-4.4L (2009)
Valve Cover: Service and Repair
Valve Cover RH
Valve Cover RH
Service Repair No - 12.29.44
Removal
1. Disconnect the battery ground cable.
2. Remove the ignition coil-on-plug.
3. Remove the remaining ignition coil-on-plugs.
4. Disconnect the positive crankcase ventilation (PCV) line.
5. Release the engine wiring harness from the valve cover.
^
Remove the 2 nuts.
^
Release the 4 clips.
^
Position the engine cover mounting bracket aside.
6. Disconnect the variable camshaft timing (VCT) oil solenoid electrical connector.
7. NOTE: Note the fitted position of the retaining bolts prior to removal.
Remove the valve cover assembly.
^
Remove the 14 valve cover retaining bolts.
^
Remove the engine cover bracket.