Range Rover (LM) V8-4.4L (2009)
CAUTION: Note the position of the bolts, prior to removal.
9. Remove the oil pan.
^
Remove the 19 bolts.
^
Carefully remove the sealant.
Installation
1. Install the oil pan.
^
Clean the component mating faces.
^
Apply a bead of sealant, 3 mm diameter, to the area indicated.
^
Install the bolts, but do not tighten fully at this stage.
2. Tighten the oil pan bolts in the sequence shown to 20 Nm (15 ft. lbs.).