Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-693004.png)
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components.
Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
18. Using the special tool, disconnect the fuel line.
^
Remove the clip.
19. Remove the intake manifold assembly.
^
Remove the 10 bolts.
^
Discard the 2 gaskets.
NOTE: Do not disassemble further if the component is removed for access only.
20. Remove the intake manifold casting.
^
Disconnect the vacuum hose from the intake manifold.
^
Remove the 4 bolts.
21. Remove the NVH pad from the RH side of the intake manifold.
22. Remove the intake manifold MAP sensor housing.
^
Remove the 7 bolts.
