Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-708001.png)
Timing Cover: Service and Repair
Engine Front Cover
Service Repair No - 12.65.01
Removal
1. Disconnect the battery ground cable.
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
2. Raise and support the vehicle.
3. Drain the cooling system.
4. Remove the coolant manifold.
5. Remove the RH air cleaner assembly.
6. Remove the cooling fan drive pulley.
^
Remove the 3 bolts.
7. Remove the cooling fan drive hub bearing.
^
Remove the 5 bolts.
8. Remove the cooling fan belt tensioner.
^
Remove the bolt.
9. Release the accessory drive belt.
^
Rotate the accessory drive belt tensioner counter-clockwise, using a 3/8" drive wrench.
NOTE: Note the fitted position.
10. Remove the accessory drive belt.
11. Using the special tools, retain the crankshaft pulley.
CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the
crankshaft.
