Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-708002.png)
NOTE: The crankshaft pulley retaining bolt will be very tight.
12. Remove the crankshaft pulley retaining bolt.
^
Discard the bolt.
13. Remove the special tools.
14. Using the special tools, remove the crankshaft pulley.
^
Collect the locking ring.
15. Remove the special tools from the crankshaft pulley.
16. Using the special tool, remove the crankshaft front seal.
^
Remove the outer section of the seal.
^
Repeat the process to remove the inner section of seal.
