Range Rover (LM) V8-4.4L (2009)
22. Install the crankshaft pulley.
^
Lubricate the seal with clean engine oil.
23. Install the crankshaft pulley locking ring.
CAUTION: The screw thread in the crankshaft pulley must be cleaned out before installing a new crankshaft pulley bolt.
24. Install, but do not tighten, the new crankshaft pulley bolt.
CAUTION: Under no circumstances should the crankshaft setting peg, 303-645, be used in the following operations, to restrain the
crankshaft.
25. Using the special tools, retain the crankshaft pulley.
^
Tighten the crankshaft pulley bolt to 380 Nm (280 ft. lbs.).
26. Remove the special tools.
27. Install the accessory drive belt.
28. Install the cooling fan belt tensioner.
^
Tighten the M10 bolt to 45 Nm (33 ft. lbs.).
29. Install the cooling fan drive hub bearing.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
30. Install the cooling fan drive pulley.
^
Tighten the bolts evenly to 25 Nm (18 ft. lbs.).
31. Install the RH air cleaner assembly.