Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-771004.png)
All vehicles
20. Remove the LH front side member exhaust heat shield.
^
Remove the 4 nuts.
21. Disconnect the exhaust manifold EGR pipe flange.
^
Remove the 2 nuts.
^
Discard the gasket.
22. Remove the exhaust manifold.
^
Remove and discard the 8 bolts.
^
Remove the gasket/heat shield retaining bolt.
^
Discard the gasket/heat shield.
Installation
All vehicles
1. Install the exhaust manifold.
^
Clean the component mating faces.
^
Install the gasket/heat shield and tighten the bolt to 10 Nm (7 ft. lbs.).
^
Install, and lightly tighten the bolts.
^
Evenly and progressively, tighten the bolts in the sequence shown to 20 Nm (15 ft. lbs.).
