Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-772004.png)
7. Attach the lower steering column.
^
Make sure that the steering gear tag is aligned correctly, as shown.
^
Install anew Torx bolt and tighten to 24 Nm (18 ft. lbs.).
All vehicles
8. Install the engine compartment RH heat shield.
^
Tighten the screws.
^
Tighten the nuts.
9. Install the engine undershield.
10. Install the fender splash shield.
11. Install the front wheel.
^
Tighten the wheel nuts to 140 Nm (103 ft. lbs.).
12. Connect the battery ground cable.
