Range Rover (LM) V8-4.4L (2009)
/v8-4.4l/Page-1840003.png)
Installation
1. Install the driver side register.
-
Connect the electrical connector.
-
Position and secure the clips.
Passenger Side Register
Passenger Side Register
Removal
CAUTION: Care must be taken to avoid damaging the passenger side register internal components.
NOTE: Left-hand shown, right-hand similar.
1. Remove the passenger side register.
-
Carefully release the 4 internal clips, apply an even outward pressure until the last clip is released.
-
Disconnect the electrical connector.
